BreezEV EVC-L2-48A-L1-1-4G-D-AU-P-4G-5 48 Amp EV Charger, Wall Mount, 4G Cellular, PRO Plan

Part: EVC-L2-48A-L1-1-4G-D-AU-P-4G-5
Product Description

BreezEV EVC-L2-48A-L1-1-4G-D-AU-P-4G-5 48 Amp EV Charger, Wall Mount, 4G Cellular, PRO Plan

*Pedestal option available

*40A & 48A Cable sets available in 12,15, 18, & 25ft lengths

The BreezEV by Light Efficient Design EVC-L2-48A-L1-1-4G-D-AU-P-4G-5 is a 48 Amp wall mount electric vehicle charger with 4G LTE, RFID, and Ethernet communication, LCD screen, and a 5-year AmpUp PRO plan. It features Level 2 charging, which is compatible with every E-Vehicle manufacturer. Can be wall-mounted or attached to a free-standing pedestal. One year or five-year service plans are also available. Cables, mounting equipment, and service plans are sold separately (see accessories below). See below for directions on how to order a complete charging station

  • Ideal for retail, commercial or municipal properties, or multi-unit housing
  • AmpUp PRO software includes reporting, real-time analytics, pricing & payment management, troubleshooting, and load management.
  • Allows for various payment options
  • Built-in LCD screen
  • 4G LTE or Ethernet with AmpUp Open Charge Point Protocol (OCPP) cloud-based software
  • RFID card reader
  • 48 Amp max output, switchable down to 16 Amp
  • Natural cooling
  • UV resistant housing
  • LEDs indicate status
  • Can be used indoors or outdoors
  • Includes 5 Year AmpUp PRO Plan & one-time activation fee
  • Comes with: charging unit, wall mount bracket, two M5 mounting screws, four M6 hexagonal mounting screws, two AmpUp QR code labels, accessory kit
  • Accessory kit comes with fittings for incoming power wires, incoming power cable & charging cable, holster, and mounting screws for the holster

Specifications

  • Housing Dimensions- 9.8" Width x 13.8" Length x 5.1" Depth
  • Screen Size- 4.3"
  • Max Output- 48 Amps / 11.2 kW
  • Rated Output Current- 16 / 32 / 40 / 48 Amps
  • Input Voltage- 200-240V AC / Single Phase
  • AC Power Frequency- 60 Hz
  • Connector Type- SAE Type 1
  • Communication- Ethernet / RFID / 4G Cellular
  • OCPP Software- 5 Year AmpUp PRO
  • Input Protection- Undervoltage, Overvoltage, Reverse Charge, Surge Protection, Ground Fault Protection
  • Output Protection- Overcurrent, Over Temperature, Control Pilot Fault Protection
  • Storage Temperature- -40 F to 158 F
  • Operating Temperature- -22 F to 122 F
  • Relative Humidity- 95% Relative Humidity
  • RJ45 Cable Inlet- 10M/100M Base-T
  • WiFi Function- 802.11 b/g/n
  • 4G Function- LTE, GSM/GPRS
  • Ingress Protection- IP 65 (total protection from dust and low-pressure water jets from any direction)
  • Impact Resistance- IK08
  • Warranty- 3 Year Manufacturer's Warranty


  1. Required: Choose cable set (see accessories below). You can choose between 40A or 48A. Many current EV models cannot charge at higher rates, so the lower 40A cables would be sufficient. Then pick the cable length. All cables are field attached to the charger.
  2. Optional: Choose mounting pedestals and brackets (see accessories below). Pedestals come with or without cable management. A bracket is only needed if two chargers will be installed side by side on the same pedestal. If you are wall mounting, you do not need any additional mounting accessories

 

$4,499.00
Please contact us for quantity discount