Lithonia LED Wafer 11.2 Watt Ultra Thin 6" Dimmable, 3000K, White

Part : WF6E LED 30K 90CRI MW M6

Sale price$12.50

Please contact us for quantity discount


Lithonia LED Wafer 11.2 Watt Ultra Thin 6" Dimmable, 3000K, White

pdf download

Lumens: 700

Kelvin: 3000K

Watts: 11.2

CRI: 90


The 6" Wafer-Thin LED recessed downlight with remote driver box combines high quality
light output and efficiency while eliminating the need for a recessed housing. The innovative,
slim design allows for easy retrofit, remodel or new construction installation from below the
ceiling. The Wafer downlight provides general illumination in residential and commercial
applications including multi-family and hospitality. Ideal for use in living and dining areas,
bedrooms, closets, hallways, bathrooms, kitchens, basements, soffits, entryways and porches.
The Wafer LED downlight is wet location listed – making it ideal for use in a breadth of
outdoor residential, hospitality, commercial and multifamily applications. Non-conductive
dead-front trim design suitable for a wide range of applications and codes requiring a
nonconductive lens assembly.
Die cast aluminum mounting frame with integral polycarbonate flange provides passive
thermal cooling achieving L70 at 50,000 hours. IC rated driver and fixture - approved for
direct contact with insulation. FT4 plenum rated cable connector to connect from module to
remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts
with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to
accommodate up to (6) 14 gauge insulated conductor, or (4) 12 gauge insulated conductors;
making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain
applications and contractor friendly. Wire nuts included.
Connect directly to 120V power supply via provided UL recognized driver. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers).
Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation.
6" cut out template provided to ensure correct sized hole is cut into ceiling for proper
installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable
for installation in t-grid and drop ceiling applications with the WF8643 Pan. 2" plenum space
required for installation of the remote driver box.